Description

Mobeli QuattroPower Tub Support Grab Bar System for Bathtubs with Extra Grip

Suction bar system with three swivel points can be attached inside and outside of your tub. Quattro+Power can support high pull and vertical loads. A support bar, 28.8" long can span across your tub. A grip horn extends beyond the end for more support upon entering. Two pads on each end provide a higher capacity. When not needed, disconnect one end and a brake will hold the bar in a vertical parked position.

Note, for the suction pad to adhere to the wall, the surface must be airtight, with no grout lines, cracks or texture under the pad. Our stainless steel plates R1461414 can be adhered to many non-suitable surfaces to allow the suction pads to adhere. The plates can span over grout line or cracks, fill in slightly textured surfaces. Telescoping models will allow you to adjust the bar to fit between grout lines, seams or cracks.

Product Video

• 4 pads distribute more weight for higher capacity.
• One long bar spans the width of the tub.
• Can be mounted on inside or outside edge of the tub.
• Can swing up and out of the way.
• Grip extension makes it easier to grasp and enter the tub.

Examples of surfaces that will not work:

• New construction with only a few coats of paint will still allow the suction pad to suck air through the plasterboard or drywall. The suction pad will not hold and may even pull the paint off the wall.
• Natural stone, clay or cultured marble which has a not been coated with sealant will allow the suction pad to suck air and release.
• Textured surface, whether stone, cement, tile or plaster will not hold the suction pad.
• Cracked plaster or wall surface. Walls with seams in the grab bar area.
• Tile smaller than 5” square. A suction pad over a grout line will release. Plastic tile will not support your body weight.
• Dirty, oily, greasy wall surface. Clean the surface with alcohol first.
• Wallpaper, the suction pad will peel the paper from the wall behind it.
• Tub surround walls that are not properly attached to the wall behind them. Although the suction pad may hold to the wall, the wall itself may pull away under your weight.

What surface will work:

• Tile greater equal to or larger than 5”x5”, with a smooth surface.
• Smooth fiberglass, porcelain, enamel-coated cast iron tubs.
• Vinyl, plastic or fiberglass tub surrounds that are firmly attached to the wall or house framing behind them. Securely attached with construction adhesive or mechanical means (screws or nails). They must have a smooth, clean surface.

Extended Product Information:

• Product Brochure
• User's Manual