Brand: ETOSHA

Color: Orange

Features:

• Blasting with power,optimal power with easy starting and superior reliability.Low oil shutdown,4800PSI 6.5HP OHV 4-Stroke easy start.
• Built-in detergent tank,add cleaning solutions for a deeper clean.Self suction capability with hose and filter to draw water from a tank,dam or natural source.
• Welded steel construction frame.Pump/Hose.Pro-tip nozzles, the right spray pattern for the job.5 Quick connect nozzle(tips: 0°, 15°, 25°, 40°,65°)provide more effective cleaning power on a variety of surfaces.
• Power 220cc OHV engine delivers maximum cleaning performance; Starting Type: Manual/Recoil.Keep Maximum Fuel below bottom of filler neck to avoid fuel spillage.
• All pressure washers are 100% functionally tested in our factory and may contain minimum residual fuel/oil or fuel odor.

Details: Brand:ETOSHA Color:Orange/Black Pound per Square Inch (PSI):4800PSI Rated rotation speed:3400RPM Max flow:9.2L/min Engine:OHV 4-Stroke Hose:65ft Nozzles:Quick Connect Tips (0°, 15°, 25°, 40°,65° and soap) Power Source:PetrolLimited Warranty:1-year limited warranty Before using the high-pressure cleaning machine, please be sure to read the product manual and matters needing attention carefully.  If you encounter any problems during the trial, please contact the customer service immediately.  We have a professional team to customize solutions for you, please believe us. Common problems and solutions: Symptoms: intermittent or no water from the machine Operation: remove the uppermost gun shaft, open the machine normally and pull the gun handle. If the water outlet is normal, it indicates that there is a foreign body blocking the uppermost gun shaft.Use the needle to dredge, and finally grasp the head of the gun to shake.Remove foreign bodies. Symptoms: machine water pressure is small Action: follow these steps to find the reason: 1: the inlet filter screen is blocked (clean the filter screen) 2: whether the gun head is blocked (dredge the gun head) 3: there is foreign body in the inlet and outlet one-way valve (check whether there is foreign body in the inlet and outlet one-way valve) 4: there is a fault inside the machine (disassemble the host to check the fault point) 5:Check if there is enough water 6: whether the connection of each part is loose Symptom: the machine cannot absorb water Operation: 1: the inlet pipe and the inlet valve of the machine should be inserted tightly 2. The inlet pipe shall not exceed 5 meters